In line (JZ1200) with 2 other BIESSE Techno Kernel machines (cod. J06032 + J06033)
Electronic machine, controlled by N.C.
Numerical Control. Software 3D TechnoCAD
Through-feed motorized transport belts (No.) 2
Horizontal units/supports (No.) 2
Drilling heads/Blocks for each horizontal unit (No.) 2 x BH 11
Spindles for each horizontal drilling head (No.) 11 independent
Max. working width (mm) 2800. Min. working width (mm) 205 (ca.)
Bottom vertical units/supports (No.) 6
Drilling heads/blocks for each bottom vertical unit (No.) 2 (x Kw 1,7)
Top vertical units/supports (No.) 6
Drilling heads/block for each top vertical unit (No.) 2 (x Kw 1,7)
Vertical top pressure clamps (No.) 6
Motorized endless screws to evacuate wastes/chips (No.) 2
The CNC controls the movement (X axe) of the mobile horizontal unit
The CNC controls the vertical movement (Hv) of the 2 horizontal units
The CNC controls the movement (X axe) of all the vertical units
The CNC controls the movement (Z axe) of all the vertical units
The CNC controls the movement (Y1 and Y2 axes) of the boring heads
The CNC controls the movement (Y axe) of the reference stops
The CNC controls the movement (X axe) of the pressure clamps
The CNC controls the movement (X axe) of the conveyor belts
The CNC controls programming of the working cycles