Angular panel saw with automatic pre-loading and twin pusher system for optimised cutting
Osi Plus Numerical Control
Os Labelling labelling machine with on-board graphic labelling with part drawings
Label printing management software
Optiplanning Cutting Optimizer
Cutting length mm 4500
Cutting width mm 2200
Blade projection 95 mm
Motorized rollers for lateral loading on lifting table 4500 x 2200 mm. The translation speed is 10.8 mmin
(50hz) – 13.1 mmin (60hz)
Automatic recognition of the lost panel (martyr panel) based on the thickness specified in the machine data
Low battery stop
Automatic side loading buffer. Includes: perimeter nets, double photocell, push-button panel, predisposition
electric for the two motorized pre-rollers and the amplification of 4 rollers in place of the fork passages in the pre-
intermediate roller conveyor
Pre-loading side roller conveyor dim 3800 x 2200 mm with motorized rollers (height from the ground 325 mm)
Inertial conveyor for conveying longitudinal trimmings for angular systems 4500 mm (total length 7295 mm)
3000 mm extension to the inertial conveyor to also convey transverse trimmings
Long chute for manual conveying of cross-cut trimmings to the centralized inertial conveyor
2050 x 850 mm air curtain discharge table with wheels at the front
Air generator up to 6 floors with air curtain
MULTIPUSHER 2.4 system with automatic lubrication
Additional mobile lateral aligner on the transverse plane. The presence of this device allows to reduce from
1830 to 1220 mm is the minimum length of the panels that must be sent for cross-sectioning.
Automatic blade shaft bending detection device for angular systems (longitudinal and transversal)
consisting of a sensor that detects the deflection directly on the blade shaft and a device that detects the revolutions
blade directly on the spindle.
Remote cycle start button panel
Automatic panel loading via rear lifting table
Automatic double aligner with pneumatic cylinders
Additional movable lateral aligner on the transverse plane
Main blade, max diameter mm, KW 15
Scoring blade, max diameter mm, KW 2.2
Blade carriage speed 1-140 m/min. – BRUSHLESS motors
Longitudinal pusher carriage speed 90 m/min.
Cross pusher carriage speed 135 m/min.
Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the transverse carriage (8 fixed grippers + 2 on the
multi-push system)
Cutting system for thin panels